fire fighting motorcycle FM250 with water mist extinguisher

this motorcycle can be used as flexible, maneuvering portable way with high technology,high efficiency and quick action.

spec of water mist extinguisher:

Propellant	Compressed atmospheric air
Pressure source	6.8 litre breathing apparatus tank made of aluminium inner and carbon composite outer for 300 bar pressure
Working pressure	Preset at 20 bars
Nozzle pressure	13 bars
Lance measurements	65 cm long, 3.5 kg
Spray options	Micro-drops or jet stream of aspirated foam as selected by operator with instant change
Stream options	Continues stream or manual pulsing
Range	11 metres
Drop size (micro-drops)	7-100 microns
Water/foam tank	2 x 20 litre stainless steel water/foam tanks, sufficient for 120 seconds on constant spray
Flow	20 litres per min. (micro-drops), 110 litres per min. (aspirated foam)
Recommended foam solution	3% AR-AFFF (alcohol resistant) foam solution, premixed in water
Foam expansion rate	Low expansion rate, approximately 1:5
Hose	30 metre ½” hose on reel with manual rewind
Fire fighting capability	Able to fight class A, B, C and E fires

spec of motorcycle

length(mm)	2260
width (mm)	850
height (mm)	1140
wheel base (mm)	1500
rated maximum load (kg)	150
maximun speed (km/h)	95
front tire	110/90-16
rear tire	130/90-15
fuel consumption(L/100km)	≤2.9
brake mode(front/rear)	disc/drum
ignition	CDI
fuel tank capacity (L)	14
engine type	single cylinder,air-cooled,4-stroke
engine model no.	171FMM
bore x stroke (mm)	69 x 62.2
displacement (ml)	232.6
starting mode	electric and kick start
headlight	12V-35W/35W
turning signal light	12V-10W
brake light/rear lamp	12V-21W/5W

fire fighting motorcycle FM250 with water mist extinguisher